|
 
MODEL
KRF 32mm @@@ MODEL
KRF 80mm
|
Operation conditions
|
|
|
Working Pressure : 0 ` 2.0 MPa
|
|
Working Temperature : 0 ` 80
|
|
Usable Fluid : Tab Water ; Warm Water
|
Basic
application
Pilot operated
Pressure Reducing Valves Model KRF are used at various
places where
large flow and stable outlet pressure is required, such as
fire fighting
equipment, chemical plant, regional cooling and heating
system, water
distribution system, etc.
|
Features
|
|
1. KRF is equipped with a Relief Valve to prevent
increase of outlet pressure caused by dead end shut off.
|
|
2. KRF has Gauge Adaptors at the inlet and outlet
side of main valve.
Pressure Gauge can be installed while water is
flowing. Thus Set Pressure is easily read.
|
|
3. Both main valve and pilot valve of KRF are
loaded with perforated Strainers to prevent dust choke and longer Diaphragm
life.
|
|
4. Main wetted parts of KRF are made of Bronze or
Stainless Steel to prevent red rust and rust contamination, thus avoid
abnomal operation of valve due to rust.
|
|
5. KRF provides stable operation because the
timing of opening/closing valve is adjusted by three ball valves.
|
|
6. KRF is designed with less parts and longer life
of each part. Thus to reduce maintenance frequcncy.
Moreover, maintenance such as changing parts can be done
within extreme short time.
|
PDF CATALOG
ฃ GO PRODUCTS INFORMATION
E-mailFoverseasales@kkk-kane.co.jp
|
Copyright (C) KANEKOGYO CO., LTD. All right reservedB
|
|
